1996 Ford Windstar Owner's Manual - Page 211

Electronic Sound Systems How to tune radio stations There are four ways for you to tune in a particular station. You can manually locate the station using the "SCAN/TUNE" button, "SEEK" the station, "SCAN" to the station or select the station by using the memory buttons, which you can set to any desired frequency. These four methods are described below. s Using the "TUNE" function You can change the frequency up or down one increment at a time (FM changes in increments of 200 kHz; AM changes in increments of 10 kHz) by first pressing the "SCAN/TUNE" button twice (display shows "TUNE"), then - within approximately five seconds - pressing and releasing either the right (a) or left (b) side of the "SEEK" button. To change frequencies quickly, press and hold down either the right or left side of the "SEEK" button. Manual tuning adjusts your radio to any allowable broadcast frequency, whether or not a station is present on that frequency. (See All About Radio Frequencies in this section.) s Using the "SEEK" function This feature on your radio allows you to automatically select listenable stations up or down the frequency band. Press the right (a) side of the "SEEK" button to select the next listenable station up the frequency band. Press the left (b) side of the button to select the next listenable station down the frequency band. By holding the button down, listenable stations can be passed over to reach the desired station. 209