1996 Ford Windstar Owner's Manual - Page 203

Electronic Sound Systems When in the CD mode, push the "CLOCK" button to change the display from elapsed time mode to track number mode to clock mode. If the CD track selection is changed when you are in the clock or elapsed time mode, the new track number will be displayed for approximately ten seconds and then revert back to the previous mode. To set the clock, simultaneously press the "CLOCK" button and either the bottom (b) half of the "SEEK" button to set hours, or the top (a) half of the "SEEK" button to set minutes. NOTE: The clock can be set with the radio and/or ignition on or off. Using the Controls on Your New Compact Disc Player Your new Ford Compact Disc Player is capable of playing 12 cm or 8 cm discs, without an adapter! The Player operates when the power is on and a disc is inserted (label side up). Handle the disc by its edge only. (Be sure to read and follow all of the care and cleaning instructions under How To Take Care of and Clean Your CD Player and Discs. NOTE: If after you insert a disc, the disc is ejected and "ERROR" begins scrolling in the display, remove the disc and reinsert it right side up (label side up). The digital display on your CD player will either show the track (selection) number or the elapsed time. (The display mode can be selected by pressing the "CLOCK" button.) Indicators for play (a), stop (X) and compression on ("C") are also in the display. (These features are described later.) Once a disc is inserted, operation of the CD player will override that of the radio. NOTE: The volume, bass, treble, balance and fader controls on the radio are also used with the CD player. Refer to earlier operating instructions on these controls. 201