1996 Ford Windstar Owner's Manual - Page 205

Electronic Sound Systems How to fast forward or reverse your CD player To quickly search for a particular point in a selection, press the "FF" button (to fast forward) or the "REV" button (to reverse). While either button is pressed, the disc goes forward or backward at two different speeds depending on how long the button is held down. (Pressing either button for more than approximately three seconds will speed up the process.) Release the button at the desired point (found by watching the elapsed playing time in the display or by listening to the sound during fast forward or reverse). When you have reached the beginning of track 1, the CD player will begin playing. When you have reached the end of the disc by keeping the fast forward button pressed, the display will show "END" and the player will go into pause mode. Push the "PLAY/STOP" button to begin playing the first track of the disc, press the "REV" button to back up from the end of the disc, or use the "SEEK" function to locate a desired track. Using the "SEEK" feature Press the top (a) of the "SEEK" button once to repeat the current playing selection. Press the bottom (b) of the "SEEK" button to advance to the next selection. Pressing and holding the top (a) or bottom (b) of the "SEEK" button will scroll backward and forward respectively through the tracks. Using the "SCAN" function Press the "SCAN/TUNE" button to enter the scan mode. Once in the scan mode, press the top (a) or bottom (b) half of the "SEEK" button to scan forward or reverse, respectively. The CD player will begin scanning the disc, stopping on each listenable track for approximately eight seconds. This continues until you press the "SCAN/TUNE" button a second time. While in the scan mode, the display shows the current sampled track number. 203