2010 Jeep Wrangler Owner's Manual - Page 172

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 Rear Hard Top Installation NOTE: If the door frames are installed from soft top usage, they must be removed prior to installation of the DOOR FRAME hard top. 1. Inspect the hard top seals for damage and replace if necessary. 2. Install the hard top using the same steps for removal in reverse order. Make sure that the hard top is sitting flush with the body at the sides and check to ensure that there is a uniform gap between the lift glass and hard top. NOTE: • The Torx fasteners that attach the hard top to the body should be torqued to 66 in lb +/- 22 in lb (7.5 N·m +/2.5 N·m) • It is not necessary to pinch connection when reinstalling washer hose. Push on until click is heard. WARNING! Do not drive your vehicle on pavement with the door frame(s) removed as you will lose the protection that they can provide. This procedure is furnished for use during off-road operation only. 3 CAUTION! Failure to follow these cautions may cause interior water damage, stains or mildew: • Opening a door or lowering a window while the top is wet may allow water to drip into the vehicle's interior. (Continued)