2010 Jeep Wrangler Owner's Manual - Page 248
2010 Jeep Wrangler Manual
Page 248 highlights
UNDERSTANDING YOUR INSTRUMENT PANEL 247 7. Seat Belt Reminder Light A warning chime and an indicator light will alert you to buckle the seat belts. When the belt is buckled, the chime will stop, but the light will stay on for about six seconds, until it times out. Refer to "Occupant Restraints" in "Things To Know Before Starting Your Vehicle" for further information. while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound when this light turns on. Do not operate the vehicle until the cause is corrected. This light does not indicate how much oil is in the engine. The engine oil level must be checked under the hood. 10. High Beam Indicator 8. Turn Signal Indicators This indicator shows that the high beam headThe arrows will flash with the exterior turn signals lights are on. Push the multifunction control lever when the turn signal lever is operated. A tone will away from you to switch the headlights to high beam. chime if the turn signals are left on for more than 1 mile Pull the lever towards you to switch the headlights back (1.6 km). to low beam. If the driver's door is open, and the headlights or park lights are left on, the high beam 9. Oil Pressure Warning Light This light indicates low engine oil pressure. The indicator light will remain illuminated and a chime will light should turn on momentarily when the engine sound. is started, if the bulb does not come on, have the system checked by an authorized dealer. If the light turns on 4