2010 Jeep Wrangler Owner's Manual - Page 267

266 UNDERSTANDING YOUR INSTRUMENT PANEL symbol appears, however, it will revert back to its Setting the Compass Variance Refer to the variance map for the correct compass vari- original setting after programming the compass funcance zone. To check the variance zone, the ignition must tions. be ON. Press and hold the left button (located on the instrument cluster) for approximately 10 seconds to enter the variance mode and release the button when the VAR symbol appears. The current variance value will also be displayed. To change the zone, press the left button once to increment the zone. The default is Zone 8. After Zone 15, the values will wrap around to Zone 1. When the correct zone is displayed (per the Compass Variance Zone Map) for the zone that the vehicle is located in, wait for about five seconds; then the trip computer will store the variance value in memory and the compass will resume normal operation. NOTE: The U.S./Metric display will change from English to Metric or Metric to English before the VAR Compass Variance Map