2010 Jeep Wrangler Owner's Manual - Page 270

UNDERSTANDING YOUR INSTRUMENT PANEL 269 If your vehicle is not equipped with or this feature is not 5. To exit, press any button/knob or wait five seconds. available on your vehicle, a "Not Equipped With The clock can also be set by pressing the SETUP button Uconnect" message will display on the radio screen. and selecting the "SET HOME CLOCK" entry. Once in this display follow the above procedure, starting at TIME Button Press the TIME button to alternate locations of the time step 2. and frequency display. INFO Button Clock Setting Procedure Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio Text 1. Press and hold the TIME button until the hours blink. message broadcast from an FM station (FM mode only). 2. Adjust the hours by turning the right side TUNE/ RW/FF SCROLL control knob. Pressing the RW (Rewind) or FF (Fast Forward) buttons 3. After adjusting the hours, press the right side TUNE/ causes the tuner to search for the next frequency in the SCROLL control knob to set the minutes. The minutes direction of the arrows. This feature operates in AM, FM or Satellite (if equipped) frequencies. will begin to blink. 4. Adjust the minutes using the right side TUNE/ TUNE Control SCROLL control knob. Press the TUNE/SCROLL control Turn the rotary TUNE/SCROLL control knob clockwise to increase or counterclockwise to decrease the frequency. knob to save the time change. 4