2010 Jeep Wrangler Owner's Manual - Page 34

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 NOTE: Use the "Automatic Unlock Doors On Exit" Automatic Door Locks Programming The "Automatic Door Locks" feature can be enabled or feature in accordance with local laws. disabled as follows: Automatic Door Locks The doors will lock automatically on vehicles with power 1. Close all doors and place the key in the ignition. door locks if all of the following conditions are met: 2. Cycle the ignition switch between LOCK and ON and 1. The "Automatic Door Locks" feature is enabled. then back to LOCK four times ending up in the LOCK position. 2. The transmission is in gear. 3. Press the power door LOCK switch to lock the doors. 3. All doors are closed. 4. A single chime will indicate the completion of the 4. The throttle is pressed. programming. 5. The vehicle speed is above 15 mph (24 km/h). 5. Repeat these steps if you want to return this feature to 6. The doors were not previously locked using the power its previous setting. door lock switch or Remote Keyless Entry (RKE) NOTE: Use the "Automatic Door Locks" feature in transmitter. accordance with local laws. 2