2010 Jeep Wrangler Owner's Manual - Page 48

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 Left First Row Second Row Third Row ALR Center ALR Right ALR ALR remove slack from the seat belt in the event of a collision. These devices improve the performance of the seat belt by assuring that the belt is tight about the occupant early in a collision. Pretensioners work for all size occupants, including those in child restraints. 2 If the passenger seating position is equipped with an NOTE: These devices are not a substitute for proper seat ALR and is being used for normal usage: belt placement by the occupant. The seat belt still must be Only pull the belt webbing out far enough to comfortably worn snugly and positioned properly. wrap around the occupants mid-section so as to not The pretensioners are triggered by the Occupant Reactivate the ALR. If the ALR is activated you will hear a straint Controller (ORC). Like the airbags, the pretensionratcheting sound as the belt retracts. Allow the webbing ers are single use items. A deployed pretensioner or a to retract completely in this case and then carefully pull deployed airbag must be replaced immediately. out only the amount of webbing necessary to comfortably wrap around the occupants mid-section. Slide the Enhanced Seat Belt Use Reminder System (BeltAlert ) latch plate into the buckle until you hear a click. If the driver's or front passenger's (if equipped with belt Seat Belt Pretensioners - If Equipped alert) seat belt has not been buckled within 60 seconds of The seat belts for both front seating positions may be starting the vehicle and if the vehicle speed is greater equipped with pretensioning devices that are designed to than 5 mph (8 km/h), the Enhanced Warning System