2010 Jeep Wrangler Owner's Manual - Page 67
2010 Jeep Wrangler Manual
Page 67 highlights
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Check belt fit periodically. A child's squirming or means for adjusting the tension of the strap. Forwardfacing toddler restraints and some rearward-facing infant slouching can move the belt out of position. restraints will also be equipped with a tether strap having • If the shoulder belt contacts the face or neck, move the a hook for attachment to the tether strap anchorage, and child closer to the center of the vehicle. Never allow a a means for adjusting the tension of the strap. child to put the shoulder belt under an arm or behind In general, you will first loosen the adjusters on the lower the back. and tether straps so that you can more easily attach the NOTE: For additional information, refer to hook or connector to the lower and tether anchorages. www.seatcheck.org or call 1-866-SEATCHECK. CanaThe tether strap should be routed under the center of the dian residents, should refer to Transport Canada's webhead restraint and attached to the tether anchor on the site for additional information. http://www.tc.gc.ca/ rear of the seatback. Then tighten all three straps as you roadsafety/safedrivers/childsafety/index.htm push the child restraint rearward and downward into the seat. Installing the Child Restraint System We urge you to carefully follow the directions of the Not all child restraint systems will be installed as we manufacturer when installing your child restraint. Many, have described here. Again, carefully follow the instrucbut not all, restraint systems will be equipped with tions that come with the child restraint system. separate straps on each side, with each having a hook or connector for attachment to the lower anchorage, and a