2007 Nissan Murano Owner's Manual - Page 156
2007 Nissan Murano Manual
Page 156 highlights
AUTOMATIC DRIVE POSITIONER (if so equipped) The automatic drive positioner system has two features: ¼ Entry/exit function ¼ Memory storage ¼ The driver's seat will not return to the previous positions if the seat adjusting switch is operated when the seat is at the exit position. The entry/exit feature can be canceled. See "4. Display screen, heater, air conditioner and audio systems" section of this manual. The entry/exit function can be activated or cancelled by pressing and holding the SET switch for more than 10 seconds while the ignition key is in the LOCK position. The indicator light will blink once when the function is cancelled, and the indicator light will blink twice when the function is activated. If the battery cable is disconnected, or if the fuse opens, the entry/exit function will be cancelled. In such a case, after connecting the battery or replacing with a new fuse, open and close the driver's door more than two times with the ignition key or ignition switch in the LOCK position to activate the entry/exit function. ENTRY/EXIT FUNCTION This system is designed so that the driver's seat and outside mirror will automatically move when the selector lever is in the P (Park) position. This allows the driver to get into and out of the driver's seat more easily. The driver's seat will slide backward: The driver's seat will slide backward when the driver's door is opened with the ignition switch (knob) in the LOCK position. The driver's seat will return to the previous position: ¼ When the key is inserted into the ignition switch after closing the driver's door, or when the driver's door is closed after inserting the key into the ignition switch. ¼ When the ignition switch is pushed with the driver's door closed. (Intelligent Key equipped model) ¼ When the key or ignition switch is turned to the ON position. SPA2185 MEMORY STORAGE Two positions for the driver's seat, pedals (Brake and Accelerator) and outside mirrors can be stored in the automatic drive positioner memory. Follow these procedures to use the memory system. 1. Set the selector lever to the P (Park) position. 2. Adjust the driver's seat, pedals (Brake and Accelerator) and outside mirrors to the desired positions by manually operating each adjusting switch. For additional information, see "Seats" in the "1. Safety - seats, seat belts and supplemental restraint system" Pre-driving checks and adjustments 3-33