2007 Nissan Murano Owner's Manual - Page 319

INSTALLING FRONT LICENSE PLATE Use the following steps to mount the license plate: Before mounting the license plate, confirm that the following parts are enclosed in the vinyl bag. ¼ License plate bracket ¼ Screw x 2 ¼ Bolt grommet x 2 ¼ Bolt x 2 1. Temporarily place the license plate bracket A and mark the pilot hole points using holes k . 2. Remove the license plate bracket. 3. Carefully drill two pilot holes using a 0.39 in (10 mm) drill bit at the marked locations. (Be sure that the drill only goes through the fascia, or damage to the nut may occur.) 4. Insert grommets into the hole on the fascia. 5. Install the license plate bracket with bolts. C 6. Install the license plate with screws k. STI0459 9-12 Technical and consumer information