2007 Nissan Murano Owner's Manual - Page 28

WARNING ¼ When fastening the seat belts, be certain that the seatbacks are completely secured in the latched position. If they are not completely secured, passengers may be injured in an accident or sudden stop. ¼ When attaching the rear center seat belt connector, be certain that the seatbacks are completely secured in the latched position and the rear center seat belt connector is completely secured. ¼ If the rear center seat belt connector and the seatbacks are not secured in the correct position, serious personal injury may result in an accident or sudden stop. restraints" later in this section. The automatic locking mode should be used only for child restraint installation. During normal seat belt use by a passenger, the locking mode should not be activated. If it is activated it may cause uncomfortable seat belt tension. It can also change the operation of the front passenger air bag. See "Front passenger air bag and status light" later in this section. Rear seat SSS0291A SSS0326 Unfastening the seat belts To unfasten the belt, push the button on the buckle. The seat belt will automatically retract. Checking seat belt operation Your seat belt retractors are designed to lock belt movement using two separate methods: ¼ when the belt is pulled quickly from the retractor. ¼ when the vehicle slows down rapidly. You can check their operation as follows: ¼ grasp the shoulder belt and pull quickly for- Safety - seats, seat belts and supplemental restraint system 1-15