2007 Nissan Murano Owner's Manual - Page 230

USING ALL-WHEEL DRIVE (AWD) (if so equipped) or unexpected vehicle movement which could result in serious vehicle damage or personal injury. AWD LOCK SWITCH OPERATIONS The AWD LOCK switch located in front of the selector lever is used to select AUTO/LOCK depending on the driving conditions. Each time you push the lower part of the switch, the AWD mode will switch: AUTO → LOCK → AUTO. SSD0418 The AWD system electronically controls the coupling. A k to select the AUTO or LOCK mode depend- WARNING A vehicle equipped with AWD (AllWheel Drive) should never be tested using a two wheel dynamometer, similar to the dynamometers used by some states for emissions testing, or similar equipment. Make sure you inform the test facility personnel that your vehicle is an AWD equipped vehicle before it is placed on a dynamometer. Failure to do so may result in transmission damage Push the lower part of the AWD LOCK switch ing on the driving conditions. LOCK mode A Push the lower part of the switch k when the vehicle is stopped or driving under approximately 10 km/h (6 MPH). The AWD LOCK indicator light will come on. AUTO mode A Push the lower part of the switch k . The AWD LOCK indicator light will go off. Starting and driving 5-25