2007 Nissan Murano Owner's Manual - Page 216

2. Turn the ignition switch slightly in the ON direction. 3. Turn the key toward the LOCK position. The selector lever can be moved from P position if the ignition switch is in the ON position and the foot brake pedal is depressed. There is an OFF position in between LOCK and ACC, although it does not show on the lock cylinder. When the ignition is in OFF the steering wheel is not locked. SSD0417 when you turn it. IGNITION SWITCH POSITIONS B Push in the ignition switch to the k position A LOCK (Normal parking position) k : The ignition switch can only be locked in the LOCK position. The ignition switch will be unlocked when it is C pushed in, and turned to the ACC position k while carrying the Intelligent Key. C ACC (Accessories) k: The ignition lock is designed so that the ignition switch cannot be turned to LOCK and removed until the selector lever is moved to the P (Park) position. When turning the ignition switch, make sure the selector lever is in the P position. If the selector lever is not returned to the P position, the ignition switch cannot be moved toward LOCK. When the ignition switch cannot be turned toward the LOCK position while keeping the Intelligent Key, proceed as follows: 1. Move the selector lever into the P position. In order for the steering wheel to be locked, it must be turned about 1/6 of a turn counterclockwise from the straight up position. To lock the steering wheel, turn the ignition switch to the LOCK position. To unlock the steering wheel, push the ignition switch in and turn it gently while rotating the steering wheel slightly right and left. If the battery of the vehicle equipped with the Intelligent Key system is discharged, the ignition switch cannot be turned from the LOCK position, even using the mechanical key or valet key. This position activates electrical accessories such as the radio, when the engine is not running. D ON (Normal operating position) k : This position turns on the ignition system and electrical accessories. E START k: This position starts the engine. As soon as the engine has started, release the knob immediately. It will automatically return to the ON position. The ignition switch cannot be turned back to the LOCK position unless the selector lever is in P B position. (It can be turned only to the k position.) Starting and driving 5-11