1998 Pontiac Grand Am Owner's Manual - Page 96

If a bulb is burned out, replaceto help avoid an it go you accident. If the arrows don't on at all when The turn signal has two upward (for right) and two and signal a turn, check the fuse (see "Fuses Circuit downward (forleft) positions. These positions allow you Breakers'' in the Index). the arrows still do not flash, If or to signal a turn a lane change. the have your Pontiac Dealer service department check bulb in the instrument panel. To signal a turn, move the lever all theup or down. way When the turn is finished, lever will return the Headlamp Highhow Beam automatically. 'hrn and Lane Change Signals An arrow on the instrument panel will flash in the direction of the turn or lane change. To change the headlamps or from low beam to high high tolow, pull the t r un signal leverall the way toward you. To signal a lane change, raise or lower the lever just it there until you until the arrow starts to flash. Hold Then releaseit. When the high beams are on, a light on the instrument panel also will be on. The headlamphigMow beam indicatormay flash if the Daytime Running Lamps D m ) system is experiencing ( if a problem or a headlamp is malfunctioning. complete yourlane change. The lever will return by itself when you release it. A warning chime signal will come on if you have left (1 your turn signal for more than 3/4 mile km). on As you signal a turn or lane change, if the arrows flash a rapidly, a signal bulb may be burned out and other drivers won'tsee your turn signal. 2-35