2011 Subaru Forester Owner's Manual - Page 136
2011 Subaru Forester Manual
Page 136 highlights
Instruments and controls 3-25 When the manual mode is selected, the gear position indicator (which shows the current gear selection) and the upshift/ downshift indicator light up. Refer to "Automatic transmission" F7-15. activate the cruise control function, turn the ignition switch back to the "Acc" or "LOCK" position, and then turn it again to the "ON" position. Clock & Turn signal indicator lights These lights show the operation of the turn signal or lane change signal. If the indicator lights do not blink or blink rapidly, the turn signal bulb may be burned out. Replace the bulb as soon as possible. Refer to "Replacing bulbs" F11-47. & Cruise control set indicator light This light illuminates when vehicle speed has been set. & Front fog light indicator light (if equipped) This indicator light is on while the front fog lights are on. & High beam indicator light This light shows that the headlights are in the high beam mode. This indicator light also illuminates when the headlight flasher is operated. & Headlight indicator light This indicator light illuminates when the " or headlight switch is placed in the position. The clock shows the time while the ignition switch is in the "Acc" or "ON" position. The time changes by 1 minute each time the "+" button or "−" button is pressed. Pressing the "+" button moves the displayed time forward, while pressing the "−" button moves the displayed time back. Pressing and holding either button changes the displayed time continuously. & Cruise control indicator light This light illuminates when the "CRUISE" main switch is pressed. If you press the main switch button while turning the ignition switch "ON", the cruise control function is deactivated and the "CRUISE" indicator light flashes. To re- - CONTINUED -