AIWA LX-70 Operating Instructions - Page 18

04 Getting Started Chapter 4 Getting Started Switching on and setting up When you switch the player on for the first time the Setup Navigator screen appears. We recommend using this to make a few basic player settings. If you don't want to use the Setup Navigator, press  to select Cancel, then press ENTER to exit the Setup Navigator. 5 Use the / buttons to select the output video resolution then press ENTER. STANDBY/ON Setup Navigator Output Video Resolution Auto 576i/480i 576p/480p 720p 1080i 1080p Source Direct If you connected this player to your TV using the HDMI connector, select from Auto, 576i/480i (interlaced), 576p/480p (progressive), 720p, 1080i, 1080p, or Source Direct, then skip to step 7 (the aspect ratio will automatically be set to 16:9 (Widescreen)). Generally, the Auto setting is recommended. ENTER 1 Switch on your TV and set the video input to this player. 2 Press the  STANDBY/ON button on the remote control or the front panel to switch on. • It can take up to one minute for the unit to turn on. • When you switch on for the first time, your TV should display the Setup Navigator screen. (If the Setup Navigator doesn't appear, you can also access it from the Initial Setup menu; see page 41). • When you have this unit connected to a plasma television that is compatible with HDMI Control, language settings are imported from the plasma television's OSD settings before Setup Navigator begins. 3 Use the / buttons to choose a language, then press ENTER. Setup Navigator Language English français Deutsch Italiano Español 4 Press ENTER to start setting up using the Setup Navigator. Setup Navigator Before using, make some simple settings for the BD player. Start Cancel Please use the Initial Setup if you want to make more detailed settings. Setup Navigator Output Video Resolution S-Video/Video only 576i/480i 576p/480p 720p 1080i Don't Know If you're using an S-Video or composite video connection, select S-Video/Video only. If you're using a component video connection, match the output setting with the capabilities of your TV. Select from: 576i/480i, 576p/480p, 720p, 1080i or Don't Know. If you select 720p or 1080i, skip the next step since the aspect ratio will automatically be set to 16:9 (Widescreen). 6 Use the / buttons to select the aspect ratio of your TV then press ENTER. Setup Navigator TV Aspect Ratio 16:9 (Widescreen) 4:3 (Standard) If you have a widescreen TV, select 16:9 (Widescreen); if you have a standard size TV, select 4:3 (Standard). 7 Select 'Finish Setup' to accept the settings and exit the Setup Navigator, or 'Go Back' to go through the settings again. Setup Navigator Setup is complete! Enjoy using your BD player! Finish Setup Go Back You can run the Setup Navigator at any time by selecting it from the Options menu - see page 41. 18 En