Apple Macbook Pro Aluminum 13-Inch Black Laptop Keyb Technical Guide - Page 131

Removal, GB or 2 GB

Page 131 highlights

Removal Memory cards must be: • 1.25 inch or smaller • 1 GB or 2 GB • 204-pin • PC-8500 DDR3, 1066 MHz RAM This computer comes with a minimum of 2 GB of 1066 MHz Double Data Rate 3 (DDR3) Synchronous Dynamic Random-Access Memory (SDRAM) installed. It has two slots that can accept SDRAM Small Outline Dual Inline Memory Modules (SO-DIMMs). The slots are stacked on the logic board under the bottom case. For best performance, memory should be installed as pairs with an equal memory card in each slot. The maximum amount of memory for this computer is 4 GB, with a 2 GB DIMM installed in each slot. 1 Press out 2 ejection levers until the card pops up completely, The card pops up at an angle. Before removing the card, make sure you see the half- circle notches. If not, press the ejection levers again. 2 Pull out the card. 3 Hold the card by the edges. 4 Do not touch the gold connectors. 2010-06-15 MacBook (13-inch, Aluminum, Late 2008) Take Apart - Memory 131

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224

MacBook (13-inch, Aluminum, Late 2008) Take Apart — Memory
131
2010-06-15
Removal
Memory cards must be:
1.25 inch or smaller
1 GB or 2 GB
204-pin
PC-8500 DDR3, 1066
MHz RAM
1
Press out 2 ejection
levers until the card
pops up completely,
The card pops up at an
angle. Before removing
the card, make sure
you see the half- circle
notches. If not, press the
ejection levers again.
2
Pull out the card.
3
Hold the card by the
edges.
4
Do not touch the gold
connectors.
This computer comes with a minimum of 2 GB of 1066 MHz Double Data Rate 3 (DDR3)
Synchronous Dynamic Random-Access Memory (SDRAM) installed. It has two slots that can
accept SDRAM Small Outline Dual Inline Memory Modules (SO-DIMMs). The slots are stacked
on the logic board under the bottom case. For best performance, memory should be installed
as pairs with an equal memory card in each slot. The maximum amount of memory for this
computer is 4 GB, with a 2 GB DIMM installed in each slot.