Asus Pro WS WRX90E-SAGE SE AMD TR5 Series BIOS Manual English - Page 18

DRAM Timing Control, Current Threshold to Switch to OC Mode

Get Asus Pro WS WRX90E-SAGE SE PDF manuals and user guides View all Asus Pro WS WRX90E-SAGE SE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

CCD 10 CCX0 Ratio (Rail1) Allows you to specify a custom Core Ratio for this CCX. Use the or to adjust the value. The values range from 8.00 to 100.00 with an interval of 0.25. Configuration options: [Auto] [8.00] - [100.00] CCD 11 CCX0 Ratio (Rail0) Allows you to specify a custom Core Ratio for this CCX. Use the or to adjust the value. The values range from 8.00 to 100.00 with an interval of 0.25. Configuration options: [Auto] [8.00] - [100.00] Dynamic OC Switcher Enabling this dynamically switches back and forth between OC mode and Default modes based on current and temperature threshold specified. Configuration options: [Auto] [Disabled] [Enabled] The following items appear only when Dynamic OC Switcher is set to [Enabled]. Current Threshold to Switch to OC Mode Set this threshold to control when the CPU goes into OC Mode and when it comes back to default. Bigger than this value = OC Mode, smaller than this value = Default Mode. We recommend a value of 40A for single CCD and 60A for two CCDs. Leave Auto for board to decide optimal value. Configuration options: [Auto] [0] - [65535] Calibrated Temperature Threshold to switch back Set this threshold to control when the CPU returns to default mode. When CPU Calibrated Temperature is bigger than this threshold, CPU returns to default. Likewise, when temperature is smaller than this threshold AND current is bigger than Current Threshold, CPU slips into OC Mode. In Celsius Unit. Configuration options: [Auto] [0] - [140] Hysteresis Higher number increase the time required to persist in state when crossing thresholds before switching. Set 0 for fastest reaction and increase this to require longer times to remain said state before activation. Configuration options: [Auto] [0] - [255] DRAM Timing Control The sub-items in this menu allow you to set the DRAM timing control features. Use the and keys to adjust the value. To restore the default setting, type [Auto] using the keyboard and press the key. You can also select various Memory Presets to load settings suitably tuned for some memory modules. Changing the values in this menu may cause the system to become unstable! If this happens, revert to the default settings. Primary Timings Primary Timings Report Allows you to view the Primary Timings Report. 18 Pro WS sTR5 Series BIOS Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
18
Pro WS sTR5 Series BIOS Manual
CCD 10
CCX0 Ratio (Rail1)
Allows you to specify a custom Core Ratio for this CCX. Use the <+> or <-> to adjust
the value. The values range from 8.00 to 100.00 with an interval of 0.25.
Configuration options: [Auto] [8.00] - [100.00]
CCD 11
CCX0 Ratio (Rail0)
Allows you to specify a custom Core Ratio for this CCX. Use the <+> or <-> to adjust
the value. The values range from 8.00 to 100.00 with an interval of 0.25.
Configuration options: [Auto] [8.00] - [100.00]
Dynamic OC Switcher
Enabling this dynamically switches back and forth between OC mode and Default
modes based on current and temperature threshold specified.
Configuration options: [Auto] [Disabled] [Enabled]
The following items appear only when
Dynamic OC Switcher
is set to
[Enabled]
.
Current Threshold to Switch to OC Mode
Set this threshold to control when the CPU goes into OC Mode and when it comes
back to default. Bigger than this value = OC Mode, smaller than this value = Default
Mode. We recommend a value of 40A for single CCD and 60A for two CCDs. Leave
Auto for board to decide optimal value.
Configuration options: [Auto] [0] - [65535]
Calibrated Temperature Threshold to switch back
Set this threshold to control when the CPU returns to default mode. When CPU
Calibrated Temperature is bigger than this threshold, CPU returns to default. Likewise,
when temperature is smaller than this threshold AND current is bigger than Current
Threshold, CPU slips into OC Mode. In Celsius Unit.
Configuration options: [Auto] [0] - [140]
Hysteresis
Higher number increase the time required to persist in state when crossing thresholds
before switching. Set 0 for fastest reaction and increase this to require longer times to
remain said state before activation.
Configuration options: [Auto] [0] - [255]
DRAM Timing Control
The sub-items in this menu allow you to set the DRAM timing control features. Use the
<+> and <-> keys to adjust the value. To restore the default setting, type
[Auto]
using the
keyboard and press the <Enter> key. You can also select various
Memory Presets
to load
settings suitably tuned for some memory modules.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
Primary Timings
Primary Timings Report
Allows you to view the Primary Timings Report.