Asus Pro WS WRX90E-SAGE SE AMD TR5 Series BIOS Manual English - Page 56
Manual CPU Overclocking, DDR and Infinity Fabric Frequency/Timings, CPU Frequency
View all Asus Pro WS WRX90E-SAGE SE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
The following items appear only when [Accept] is selected for AMD Overclocking. Manual CPU Overclocking CPU Frequency Specifies a custom CPU core frequency. Should be combined with a custom CPU voltage. Power saving features for idle cores (e.g. cc6 sleep) remain active. VDDCR_CPU0~1 Voltage Specifies a custom VDDCR_CPU0~1 voltage (mV). Stepping is 5mV. Voltage ranges allows to be set will be limited outside of LN2 mode. If in LN2 mode (and CPU temp is below -40C) the allowable range of settable voltages will be extended. Configuration options: [0] - [2500] CPU Core Count Control CCD 00~11 Bit Map Down Core Control Setting this item to 1 means core is enabled, setting this item to 0 means core is software down. Bit Map Down Core Discard Changes Discard changes. Bit Map Down Core Apply Changes Check and apply changes, need to make sure core number is equaled in each CCD. SMT Control Can be used to disable symmetric multithreading. To re-enable SMT, a POWER CYCLE is needed after selecting the [Auto] option. Configuration options: [Auto] [Disable] S3 is NOT SUPPORTED on systems where SMT is disabled. Prochot VRM Throttling Disabling Prochot will disable the VRMs ability to throttle the CPU when the voltage regulator is approaching its thermal limits. Configuration options: [Auto] [Enable] [Disable] Peak Current Control Allows you to enable or disable PCC Feature. Configuration options: [Auto] [Enable] [Disable] DDR and Infinity Fabric Frequency/Timings DDR Options DDR Timing Configuration Active Memory Timing Settings Configuration options: [Auto] [Enabled] 56 Pro WS sTR5 Series BIOS Manual