Asus Pro WS WRX90E-SAGE SE AMD TR5 Series BIOS Manual English - Page 47

SATA6G Allows you to enable or disable the selected SATA port. Configuration options: [Disabled] [Enabled] SATA6G Hot Plug Designates this port as Hot Pluggable. Configuration options: [Disabled] [Enabled] M.2 Allows you to enable or disable the selected SATA port. Configuration options: [Disabled] [Enabled] 7.13 APM Configuration The items in this menu allow you to change the advanced power management settings. Restore AC Power Loss Allows your system to go to ON state, OFF state, or both states after an AC power loss. When setting your system to [Last State], it goes to the previous state before the AC power loss. Configuration options: [Power Off] [Power On] [Last State] ErP Ready Allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options are switched off. RGB LEDs and RGB/Addressable RGB Headers will also be disabled. Configuration options: [Disabled] [Enabled (S4+S5)] [Enabled (S5)] Power On By PCI-E Allows you to enable or disable the Wake-on-LAN function of the onboard LAN controller or other installed PCI-E LAN cards. Configuration options: [Disabled] [Enabled] Power On By RTC Allows you to enable or disable the RTC (Real-Time Clock) to generate a wake event and configure the RTC alarm date. When enabled, you can set the days, hours, minutes, or seconds to schedule an RTC alarm date. Configuration options: [Disabled] [Enabled] S3 Mode Enabling this option might make the system unstable, as the least general power consumption is already over the specification of standard ATX PSU in S3 mode (5Vsb/3A). Configuration options: [Disabled] [Enabled] Pro WS sTR5 Series BIOS Manual 47