Belkin F5D8232-4 User Manual - Page 17
Connection to Modem - Yellow Port - reset
UPC - 722868630921
View all Belkin F5D8232-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
section Knowing your N1 Vision 1 E. Connections to Wired Computers - Gray Ports Connect your wired (non-wireless) computers to these ports. These ports are RJ45, 10/100/1000 auto-negotiation, auto- 2 uplinking ports for standard UTP category 5 or 6 Ethernet cable. The ports are labeled 1 through 4. Use the gray cable provided to connect your computer to any one of these ports. 3 F. Connection to Modem - Yellow Port 4 This port is for connection to your cable or DSL modem. Use the cable that was provided with your modem to connect the modem 5 to this port. Use of a cable other than the one supplied with the cable modem may not work properly. 6 G. Reset Button The "Reset" button is used in rare cases when the N1 Vision 7 may function improperly. Resetting the N1 Vision will restore the N1 Vision's normal operation while maintaining the programmed 8 settings. You can also restore the factory default settings by using the "Reset" button. Use the restore option in instances where you may have forgotten your custom password. 9 i. Resetting the N1 Vision 10 Push and release the "Reset" button. The lights on the N1 Vision will momentarily flash. The "Power/Ready" light will begin to blink. When the "Power/Ready" light becomes solid again, the reset is complete. ii. Restoring the Factory Defaults Press and hold the "Reset" button for at least 10 seconds, then release it. The lights on the N1 Vision will momentarily flash. The "Power/Ready" light will begin to blink. When the "Power/Ready" light becomes solid again, the restore is complete. H. Power Jack - Black Connect the included 12V/1.25A DC power supply to this jack. 13