Belkin F5D8232-4 User Manual - Page 51
DHCP Server, IP Pool, Lease Time, Local Domain Name
UPC - 722868630921
View all Belkin F5D8232-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
section Using the Web-Based Advanced User Interface 1 3. DHCP Server The DHCP server function makes setting up a network very easy by assigning IP addresses to each computer on the network 2 automatically. The default setting is "On". The DHCP server can be turned OFF if necessary; however, in order to do so you must manually set a static IP address for each computer on your network. 3 To turn off the DHCP server, select "Off" and click "Apply Changes". 4. IP Pool 4 The range of IP addresses set aside for dynamic assignment to the computers on your network. The default is 2-100 (99 computers). If you want to change this number, you can do so 5 by entering a new starting and ending IP address and clicking on "Apply Changes". The DHCP server can assign 100 IP addresses 6 automatically. This means that you cannot specify an IP address pool larger than 100 computers. For example, starting at 50 means you have to end at 150 or lower so as not to exceed the 7 100-client limit. The starting IP address must be lower in number than the ending IP address. 8 5. Lease Time The length of time the DHCP server will reserve the IP address for each computer. We recommend that you leave the lease 9 time set to "Forever". The default setting is "Forever", meaning that any time a computer is assigned an IP address by the DHCP server, the IP address will not change for that particular 10 computer. Setting lease times for shorter intervals such as one day or one hour frees IP addresses after the specified period of time. This also means that a particular computer's IP address may change over time. If you have set any of the other advanced features of the N1 Vision such as DMZ or client IP filters, these are dependent on the IP address. For this reason, you will not want the IP address to change. 6. Local Domain Name The default setting is "Belkin". You can set a local domain name (network name) for your network. There is no need to change this setting unless you have a specific advanced need to do so. You can name the network anything you want such as "MY NETWORK". 47