Brother International CS-80 Users Manual - English - Page 26
If the spool or the spool cap is not, positioned correctly, the thread may, become tangled around
View all Brother International CS-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
S2_brotherE.book Page 20 Thursday, February 13, 2003 11:03 AM GETTING READY Push the thread cassette eject lever on the left 3 side of the machine toward the back. Place the spool for the upper thread onto the 6 spool pin. Slide the spool onto the spool pin so that the thread unwinds from the left, as seen from the top. 1 1 1 Thread cassette eject lever X The thread cassette is raised. • If the sewing machine is turned off, the thread cassette will not be ejected correctly. Remove the thread cassette. 4 1 Spool Slide the spool cap onto the spool pin. 7 With the rounded side of the spool cap positioned toward the top, slide the spool cap onto the spool pin as far as possible until the down side of the spool touches the down end of the spool pin. Pull the cover of the thread cassette out 5 toward you, and then pull off the spool cap that is inserted onto the spool pin. 1 2 3 1 Spool cap (orange) 2 Spool pin 3 Cover • Only the orange spool cap should be placed on the spool pin in the thread cassette. CAUTION G If the spool or the spool cap is not positioned correctly, the thread may become tangled around the spool pin or the needle may break. 20