Brother International CS-80 Users Manual - English - Page 38
Replacing the needle
View all Brother International CS-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
S2_brotherE.book Page 32 Thursday, February 13, 2003 11:03 AM GETTING READY Replacing the needle Replace the needle as described below. Use the screwdriver and a needle that has been determined to be straight according to the instructions in " Checking the needle" . Press (needle position button) once or 1 twice to raise the needle. Hold the needle with your left hand, and then 4 use a screwdriver to turn the needle clamp screw counterclockwise to remove the needle. 1 2 1 Screwdriver 2 Needle clamp screw • Do not apply a strong force when loosening or tightening the needle clamp screw, otherwise certain parts of the sewing machine may be damaged. 1 1 Needle position button Turn off the sewing machine. 2 With the flat side of the needle toward the 5 rear of the machine, insert the needle until it touches the needle stopper. CAUTION G Before replacing the needle, be sure to turn off the sewing machine, otherwise injuries may occur if the start/stop button is accidentally pressed and the machine starts sewing. Lower the presser foot lever. 3 1 1 Needle stopper 1 1 Presser foot lever 32