Brother International CS-80 Users Manual - English - Page 41
Replacing the Presser Foot
View all Brother International CS-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
S2_brotherE.book Page 35 Thursday, February 13, 2003 11:03 AM Replacing the Presser Foot The presser foot presses down on the fabric. 1 Presser foot precautions Be sure to observe the following precautions concerning the presser feet. CAUTION G Use the presser foot appropriate for the type of stitch that you wish to sew, otherwise the needle may hit the presser foot, causing the needle to bend or break. G Only use presser feet designed specifically for this sewing machine. Use of any other presser foot may result in injuries or damage to the machine. Replacing the presser foot Replace the presser foot as described below. For details on using the side cutter " S" , refer to " Sewing overcasting stitches using the optional side cutter" (page 62). Press (needle position button) once or 1 twice to raise the needle. CAUTION G Before replacing the presser foot, be sure to turn off the sewing machine, otherwise injuries may occur if the start/stop button is accidentally pressed and the machine starts sewing. Raise the presser foot lever. 3 1 1 Needle position button X The needle is raised. Turn off the sewing machine. 2 1 1 Presser foot lever X The presser foot is raised. Replacing the Presser Foot 35