Brother International CS-80 Users Manual - English - Page 42

Slowly lower the presser foot lever so that

Get Brother International CS-80 PDF manuals and user guides View all Brother International CS-80 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

S2_brotherE.book Page 36 Thursday, February 13, 2003 11:03 AM GETTING READY Press the black button at the back of the 4 presser foot holder. 1 Raise the presser foot lever to check that the 7 presser foot is securely attached. 2 1 Black button 2 Presser foot holder X The presser foot holder releases the presser foot. Place a different presser foot below the holder 5 so that the presser foot pin is aligned with the notch in the holder. Position the presser foot so the letter indicating the presser foot type (A, G, I, J, M, N or R) is positioned to be read. 1 Note G For details on the presser foot that should be used with the selected stitch, refer to " Stitch Settings" (page 96). 2 3 1 Presser foot holder 2 Notch 3 Pin Slowly lower the presser foot lever so that the 6 presser foot pin snaps into the notch in the presser foot holder. 1 1 Presser foot lever X The presser foot is attached. 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
GETTING READY
————————————————————————————————————————————————————————
36
4
Press the black button at the back of the
presser foot holder.
1
Black button
2
Presser foot holder
The presser foot holder releases the presser
foot.
5
Place a different presser foot below the holder
so that the presser foot pin is aligned with the
notch in the holder.
Position the presser foot so the letter indicating
the presser foot type (A, G, I, J, M, N or R) is
positioned to be read.
1
Presser foot holder
2
Notch
3
Pin
6
Slowly lower the presser foot lever so that the
presser foot pin snaps into the notch in the
presser foot holder.
1
Presser foot lever
The presser foot is attached.
7
Raise the presser foot lever to check that the
presser foot is securely attached.
Note
●
For details on the presser foot that should be
used with the selected stitch, refer to “ Stitch
Settings” (page 96).
1
2
1
2
3
1
S2_brotherE.book
Page 36
Thursday, February 13, 2003
11:03 AM