Brother International CS-80 Users Manual - English - Page 74
Buttonhole sewing
View all Brother International CS-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
S2_brotherE.book Page 68 Thursday, February 13, 2003 11:03 AM UTILITY STITCHES Buttonhole sewing The maximum buttonhole length is about 28 mm (1-1/8 inch) (diameter + thickness of the button). Buttonholes are sewn from the front of the presser foot to the back, as shown below. 1 1 1 1 Reinforcement stitching The names of parts of buttonhole foot " A" , which is used for sewing buttonholes, are indicated below. 1 2 5 3 4 A 1 Button guide plate 2 Presser foot scale 3 Pin 4 Marks on buttonhole foot 5 5 mm (3/16 inch) Use chalk to mark on the fabric the position 1 and length of the buttonhole. 1 1 Marks on fabric Pull out the button guide plate of buttonhole 2 foot "A", and then insert the button that will be put through the buttonhole. 68
UTILITY STITCHES
———————————————————————————————————————————————————————
68
Buttonhole sewing
The maximum buttonhole length is about 28 mm (1-1/8 inch) (diameter + thickness of the button).
Buttonholes are sewn from the front of the presser foot to the back, as shown below.
The names of parts of buttonhole foot “ A” , which is
used for sewing buttonholes, are indicated below.
1
Button guide plate
2
Presser foot scale
3
Pin
4
Marks on buttonhole foot
5
5 mm (3/16 inch)
1
Use chalk to mark on the fabric the position
and length of the buttonhole.
1
Marks on fabric
2
Pull out the button guide plate of buttonhole
foot “A”, and then insert the button that will
be put through the buttonhole.
1
1
1
1
Reinforcement stitching
A
1
2
5
3
4
1
S2_brotherE.book
Page 68
Thursday, February 13, 2003
11:03 AM