Brother International CS-80 Users Manual - English - Page 91
Reinforcement Stitching
View all Brother International CS-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
S2_brotherE.book Page 85 Thursday, February 13, 2003 11:03 AM Reinforcement Stitching Reinforce points that will be subject to strain, such as sleeve holes, inseams and pocket corners. Stitch Name Pattern Application Stitch Width [mm (inch.)] Auto Manual Stitch Length [mm (inch.)] Auto Manual Presser Foot Triple stretch stitch Reinforcing the seams of sleeves and 0.0 inseams (0) 0.0- 7.0 2.5 1.5- 4.0 (0- 1/4) (3/32) (1/16- 3/16) J Bar tack stitch Reinforcing the ends of openings, such as the corners of pockets 2.0 1.0- 3.0 0.4 0.3- 1.0 (1/16) (1/16- 1/8) (1/64) (1/64- 1/16) A 3 Triple stretch stitching Bar tack stitching Use triple stretch stitching to reinforce sleeve holes and inseams. Attach zigzag foot "J". 1 Bar tacks are used to reinforce points subject to strain, such as pocket corners and openings. As an example, the procedure for sewing bar tacks at pocket corners is described below. J • For details, refer to " Replacing the presser foot" (page 35). Select stitch . 2 • For details, refer to " Selecting stitching" (page 58). Start sewing. 3 • For details, refer to " Starting to sew" (page 45). Determine the desired length of the bar tack. 1 Set the button guide plate on buttonhole foot " A" to the desired length. (The distance between the markings on the presser foot scale is 5 mm (3/16 inch).) 1 2 3 1 Presser foot scale 2 Length of bar tack 3 5 mm (3/16 inch) • A bar tack with a maximum length of about 28 mm (1-1/8 inch) can be sewn. Reinforcement Stitching 85