Brother International CS-80 Users Manual - English - Page 82
When you are about 5 cm 2 inch from
View all Brother International CS-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
S2_brotherE.book Page 76 Thursday, February 13, 2003 11:03 AM UTILITY STITCHES Close the zipper, turn over the fabric, and 0 then baste the other side of the zipper to the fabric. When you are about 5 cm (2 inch) from the c end of the zipper, stop the sewing machine with the needle lowered (in the fabric), and then raise the presser foot lever. Remove the basting stitching, open the zipper, d and then continue sewing. 1 1 Basting stitching Attach the presser foot holder to the other pin a of zipper foot "I". If the presser foot holder was attached to the right pin in step 6, change it to the left pin. 1 I 2 1 Pin on the left side 2 Needle drop point Topstitch around the zipper. b Sew reverse stitches at the end of the zipper opening and align the zipper teeth with the side of the presser foot. 3 2 4 1 5 1 Right side of fabric 2 End of zipper opening 3 Reverse stitches 4 Beginning of stitching 5 Basting stitching 76