Brother International CS-80 Users Manual - English - Page 45
Raise the presser foot lever., With a screwdriver, loosen the presser foot, holder screw, and then
View all Brother International CS-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
S2_brotherE.book Page 39 Thursday, February 13, 2003 11:03 AM Raise the presser foot lever. 3 1 1 1 Presser foot lever X The presser foot is raised. With a screwdriver, loosen the presser foot 4 holder screw, and then remove the walking foot. 1 1 Presser foot holder screw Attach the presser foot holder. 5 • For details, refer to " Removing the presser foot holder" (page 37). Memo G Only the straight stitch (with reinforcement stitching) and the zigzag stitch can be used with the walking foot. For details on the stitches, refer to " Stitch Settings" (page 96). Replacing the Presser Foot 39
Replacing the Presser Foot
39
1
3
Raise the presser foot lever.
1
Presser foot lever
The presser foot is raised.
4
With a screwdriver, loosen the presser foot
holder screw, and then remove the walking
foot.
1
Presser foot holder screw
5
Attach the presser foot holder.
•
For details, refer to “ Removing the presser
foot holder” (page 37).
Memo
●
Only the straight stitch (with reinforcement
stitching) and the zigzag stitch can be used
with the walking foot. For details on the
stitches, refer to “ Stitch Settings” (page 96).
1
1
S2_brotherE.book
Page 39
Thursday, February 13, 2003
11:03 AM