Brother International CS-80 Users Manual - English - Page 55
Cutting the thread
View all Brother International CS-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
S2_brotherE.book Page 49 Thursday, February 13, 2003 11:03 AM Cutting the thread When you have finished sewing, cut the threads. When you wish to finish the stitching and the 1 sewing machine is stopped, press (needle position button) once to raise the needle. I Using the thread cutter button (Only for models equipped with the thread cutter button) When using a model equipped with a thread cutter button, the thread can easily be cut if the button is pressed. When you wish to finish the stitching, press 1 (thread cutter button) once. 2 1 1 Needle position button X The needle is raised. Raise the presser foot lever. 2 1 1 Thread cutter button X The threads are cut and the needle is raised. Raise the presser foot lever. 2 1 1 Presser foot lever Pull the fabric to the left side of the machine, 3 and then pass the threads through the thread cutter to cut them. 1 1 1 Presser foot lever CAUTION G Do not press the thread cutter button after the threads have already been cut, otherwise the needle may break, the threads may become tangled or damage to the machine may occur. 1 Thread cutter Note G Do not press the thread cutter button if there is no fabric under the presser foot or while the machine is sewing, otherwise damage to the machine may occur. G When sewing with thread thicker than #30, nylon or metallic threads, or other special threads, use the thread cutter on the side of the machine to cut the threads. Sewing 49