Brother International CS-80 Users Manual - English - Page 68
Sewing overcasting stitches using the optional side cutter
View all Brother International CS-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
S2_brotherE.book Page 62 Thursday, February 13, 2003 11:03 AM UTILITY STITCHES Sewing overcasting stitches using the optional side cutter Using the side cutter, seam allowances can be finished while the edge of the fabric is cut off. The following four stitches can be used to sew overcasting. When the side cutter is attached, be sure to use the settings in the ranges listed below. Stitch Name Pattern Application Stitch Width [mm (inch.)] Auto Manual Stitch Length [mm (inch.)] Auto Manual Presser Foot Sewing straight stitches while cutting 0.0 0.0- 2.5 2.5 0.2- 5.0 the fabric (0) (0- 3/32) (3/32) (1/64- 3/16) Overcasting stitch Preventing fraying in thin and mediumweight fabrics while cutting the fabric 3.5 3.5- 5.0 2.0 1.0- 4.0 (1/8) (1/8- 3/16) (1/16) (1/16- 3/16) S Preventing fraying in thick fabrics while cutting the fabric 5.0 3.5- 5.0 2.5 1.0- 4.0 (3/16) (1/8- 3/16) (3/32) (1/16- 3/16) Sewing zigzag stitches while cutting 3.5 3.5- 5.0 1.4 0.0- 4.0 the fabric (1/8) (1/8- 3/16) (1/16) (0- 3/16) Hook the connecting fork of the side cutter 2 onto the needle clamp screw. 1 Remove the presser foot. 1 • For details, refer to " Replacing the presser foot" (page 35). 2 1 Connecting fork 2 Needle clamp screw Position the side cutter so that side cutter pin 3 is aligned with the notch in the presser foot holder, and then slowly lower the presser foot lever. 2 1 1 Notch in presser foot holder 2 Pin X The side cutter is attached. 62