Brother International DCP-8085DN Users Manual - English - Page 117
Hot Surface
UPC - 012502622703
View all Brother International DCP-8085DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
CAUTION HOT SURFACE After you have just used the machine, some internal parts of the machine will be extremely hot. To prevent injury, when you open the front or back cover (back output tray) of the machine DO NOT touch the shaded parts shown in the illustration. If you do this you may get burned. IMPORTANT • We recommend that you put the drum unit and toner cartridge assembly on a clean, flat surface with a sheet of disposable paper or cloth underneath it in case you accidentally spill or scatter toner. • To prevent damage to the machine caused by static electricity, DO NOT touch the electrodes shown in the illustration. a Press the front cover release button and open the front cover. c Push down the blue lock lever and take the toner cartridge out of the drum unit. IMPORTANT • To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations. b Slowly take out the drum unit and toner cartridge assembly. • Wait to unpack a new drum unit until immediately before you put it in the machine. Exposure to direct sunlight or room light may damage the drum unit. • Be sure to seal up the used drum unit tightly in a bag so that toner powder does not spill out of the unit. d Unpack the new drum unit. 104