Brother International DCP-8085DN Users Manual - English - Page 121

How to reset, Packing and shipping the machine - toner reset

Page 121 highlights

How to reset C a Press Menu, 1, 8. 18.Reset 1.Network 2.All Settings Select ab or OK b Press a or b to choose 1.Network or 2.All Settings. Press OK. c Press a or b to choose 1.Reset or 2.Exit. Press OK. d If you chose 1.Reset in step c, you will asked to reboot the machine. Press a or b to choose 1.Yes or 2.No. Press OK. If you choose 1.Yes, the machine will begin the Restart. Note You can also reset the Network settings by pressing Menu, 5, 0. Packing and shipping the machine C CAUTION Make sure that the machine has fully cooled down by leaving it disconnected from the power for at least 30 minutes before packing. When you transport the machine, use the packing materials that came with your machine. If you do not pack the machine properly, you could void your warranty. The machine should be adequately insured with the carrier. a Turn off the machine's power switch. b Unplug all the cables and AC power cord from the machine. c Push the Scanner Lock Lever down to lock the scanner. This lever is located on the left of the scanner glass. IMPORTANT Damage caused to your machine by failure to lock the scanner before packing and shipping may void your warranty. d Press the front cover release button and open the front cover. e Take out the drum unit and toner cartridge assembly. Leave the toner cartridge installed in the drum unit. 108

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156

108
How to reset
C
a
Press
Menu
,
1
,
8
.
18.Reset
1.Network
2.All Settings
Select
ab
or OK
b
Press
a
or
b
to choose
1.Network
or
2.All Settings
.
Press
OK
.
c
Press
a
or
b
to choose
1.Reset
or
2.Exit
.
Press
OK
.
d
If you chose
1.Reset
in step
c
, you
will asked to reboot the machine. Press
a
or
b
to choose
1.Yes
or
2.No
.
Press
OK
.
If you choose
1.Yes
, the machine will
begin the Restart.
Note
You can also reset the Network settings
by pressing
Menu
,
5
,
0
.
Packing and shipping
the machine
C
CAUTION
Make sure that the machine has fully
cooled down by leaving it disconnected
from the power for at least 30 minutes
before packing.
When you transport the machine, use the
packing materials that came with your
machine. If you do not pack the machine
properly, you could void your warranty. The
machine should be adequately insured with
the carrier.
a
Turn off the machine’s power switch.
b
Unplug all the cables and AC power
cord from the machine.
c
Push the Scanner Lock Lever down to
lock the scanner. This lever is located on
the left of the scanner glass.
IMPORTANT
Damage caused to your machine by
failure to lock the scanner before packing
and shipping may void your warranty.
d
Press the front cover release button and
open the front cover.
e
Take out the drum unit and toner
cartridge assembly. Leave the toner
cartridge installed in the drum unit.