Brother International DCP-8085DN Users Manual - English - Page 120
Checking the remaining life of parts, Reset, Stop/Exit - reset drum
UPC - 012502622703
View all Brother International DCP-8085DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Troubleshooting and routine maintenance Checking the remaining life of parts C You can see remaining life of the machine's drum unit and periodic maintenance parts on the LCD. a Press Menu, 6, 7. 67.Parts Life 1.Drum 2.Fuser 3.Laser Select ab or OK b Press a or b to choose 1.Drum, 2.Fuser, 3.Laser, 4.PF Kit MP, 5.PF Kit 1 or 6.PF Kit 2 1. Press OK. 67.Parts Life 1.Drum Remaining: XX% 1 PF Kit 2 appears only when the optional LT-5300 tray is installed. c Press Stop/Exit. Note The life check will be accurate only if you have reset the drum counter when you installed a new drum unit. It will not be accurate if that part's life counter was reset during the life of the used part. Reset C The following reset functions are available: 1 Network You can reset the print server back to its default factory settings such as the password and IP address information. 2 All Settings You can reset all the machine settings back to the settings that were set at the factory. Brother strongly recommends you use this operation when you dispose of the machine. Note Unplug the interface cable when you reset All Settings. C 107