Brother International FAX-1010 Service Manual - Page 110
WSW04, TRANSFER, facility, setting, Selector, Earth, function, transfer, Selectors, detection,
View all Brother International FAX-1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
WSW04 (TRANSFER facility setting) Selector No. 1 Function Earth function in transfer facility 2 Dual tone detection frequency 3 in ICM recording 4 Tone detection sensitivity in ICM recording 5 Earth time length for earth function 6 Break time length for flash 8 function Setting and Specifications 0: Provided 1: Not provided No. 2 3 00 : 01 : 1x : 350 or 440 Hz (A) 440 or 480 Hz (B) 480 or 620 Hz (C) 0: OFF 1: High No. 5 6 00 : 01 : 10 : 11 : 200 ms 300 ms 500 ms 700 ms No. 7 8 01 : 10 : 11 : 1810 ms 250 ms 500 ms NOTE: Selectors 1 and 5 through 8 are not applicable in those countries where no transfer facility is supported. • Selector 1: Earth function in transfer facility This selector determines whether or not the earth function is added to the transfer setting menu to be accessed by the function switch. • Selectors 2 and 3: Dual tone detection frequency in ICM recording If the equipment detects either of the frequencies set by these selectors in ICM recording, it will disconnect the line. For example, if these selectors are set to "0, 0," the equipment will disconnect the line upon detection of 350 Hz or 440 Hz. • Selector 4: Tone detection sensitivity in ICM recording Setting this selector to "1" increases the tone detection sensitivity in ICM recording. • Selectors 5 and 6: Earth time length for earth function These selectors set the short-circuiting time length of the telephone line (La or Lb) to ground. This setting is effective only when the earth function is selected for the R key by using the function switch. • Selectors 7 and 8: Break time length for flash function These selectors set the break time length. This setting is effective only when the flash function is selected for the R key by using the function switch.