Brother International FAX-1010 Service Manual - Page 137

WSW30 (Function setting 8) Selector No. Function 1 Detection level of dial tone or I busy tone for the built-in TAD operation 3 4 Not used. 5 Speaker output level 6 Not used. 7 Recording intensity control 8 Setting and Specifications No. 1 2 3 0 0 0 : -38.0 dBm (A) 0 0 1 : -39.5 dBm (B) 0 1 0 : -41.0 dBm (C) 0 1 1 : -42.5 dBm (D) 1 0 0 : -44.0 dBm (E) 1 0 1 : -45.5 dBm (F) 1 1 0 : -47.0 dBm (G) 1 1 1 : -48.5 dBm (H) 0: Higher 1: Lower No. 7 8 00 : A 01 : B 10 : C 11 : D • Selectors 1 through 3: Detection level of dial tone or busy tone for built-in TAD operation (For those models equipped with a built-in TAD) If dial tone or busy tone inputted during ICM recording is below the level specified by these selectors, the TAD stops recording and disconnects the line. • Selector 5: Speaker output level (For those models equipped with a built-in TAD) This selector determines the speaker output level when the speaker volume switch is set to HIGH or LOW, as listed below. Selector 5 of WSW30 \ Speaker Volume Switch Positior HIGH LOW 0 (Higher) High Medium-Low 1 (Lower) Medium-High Low • Selectors 7 and 8: Recording intensity control Intensity level A B Low (light) C D High (dark)