Brother International FAX-1010 Service Manual - Page 113

WSW06 (PAUSE key setting and 2nd dial tone detection) Selector No. Function 1 I PAUSE key setting and 2nd dial tone detection 3 Setting and Specifications No. 1 2 3 0 0 0 0 0 1 0 1 0 0 1 1 1 0 0 1 0 1 1 1 0 1 1 1 : No pause : 3.5 sec. WAIT : 7 sec. WAIT : 10.5 sec. WAIT : 14 sec. WAIT : 17.5 sec. WAIT : 2nd dial tone detection only in pulse dialing (DP) system : 2nd dial tone detection both in DP and pushbutton (PB) dialing systems 4 I Detection of international tone 6 No. 4 5 6 000 : 001 : 010 : 0 11 : 100 : 101 : 110 : 111 : 50 ms 210 ms 500 ms 800 ms 900 ms 1.5 sec. 2.0 sec. 2.5 sec. 7 No. of dial tone detection times 8 2nd dial tone interrupt detecting time 0: Once 0: 30 ms 1: Twice 1: 50 ms NOTE: Selectors 4 through 8 are not applicable in those countries where no dial tone detection is supported, e.g., U.S.A. • Selectors 1 through 3: PAUSE key setting and 2nd dial tone detection Selectors 12 3 0 0 0 0 0 1 0 1 0 0 1 1 1 0 0 1 0 1 1 1 0 1 1 1 No WAIT is inserted even if the PAUSE key is pressed. Pressing the PAUSE key inserts WAIT in pulse dialing, as defined in the above table. If the PAUSE key is pressed repeatedly, the equipment beeps a refusal sound and refuses the entry. In hook-up dialing, however, the equipment allows repeated pressing with an acceptance sound, but inserts WAIT only for the first pressing. Each time the PAUSE key is pressed, the equipment detects a 2nd dial tone. If no 2nd dial tone is inputted within the specified time, the equipment disconnects the line in automatic dialing, or it starts transmitting the dial signal if given after depression of the PAUSE key in hook-up dialing. (In those countries where no dial tone detection function is supported, setting these selectors to "1, 1, 0" or "1, 1, 1" inserts a WAIT of 3.5 seconds.) V-18