Brother International FAX-1010 Service Manual - Page 73
AP6op
View all Brother International FAX-1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
1.16 Speaker and Battery (1) Disconnect the speaker harness from the main PCB, and pull up the speaker. (2) For the FAX1570MC/1030/MFC1870MC/1970MC, disconnect the battery harness from the main PCB and pull up the battery. Speaker O Speaker harness Document front sensor actuator Battery Battery harness (Provided on the FAX1570MC/1030/ MFC1870MC/1970MC) FAX1170/1270/1010/1020/MFC1770 (NCU connector) FAX1570MC/1030/MFC1870MC/1970MC (NCU connector) (Modular PCB connector) O /F 1 P9= P7 El= A-Din1741P10 1:1aP1 Speaker (Modular harness PCB connector) Main PCB P12 0 0 (Front) PS P1 P2 = P6opLi (Front) Main PCB 0 Speaker harness Battery harness • Reassembling Notes • Route the speaker harness and the battery harness through the hole provided in the main frame and through the groove on the main cover, and then hook them on the T-shaped boss (refer to Section 1.29). If either of these harnesses is loose, it will interfere with the document front sensor actuator, resulting a sensing error. - 29