Brother International FAX-1010 Service Manual - Page 65
Panel, Cover, Control
View all Brother International FAX-1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
1.11 Panel Rear Cover and Control Panel (1) Place the control panel ASSY upside down. (2) Remove the ADF parts, the pressure rollers and anti-static brush from the panel rear cover. Once removed, the ADF parts will become unusable and new parts should have to be put back in. (3) Remove the four screws from the panel rear cover. (4) Insert the tip of a flat screwdriver between the front edge of the panel rear cover and the control panel, then unhook the panel rear cover from the eight "X" latches provided on the control panel. Lift up the panel rear cover. (5) To disconnect the main-panel harness from the control panel PCB, take off the rubber foot. Once removed, the rubber foot will become unusable and new parts should have to be put back in. (6) To take out the control panel PCB and the FPC key, unhook the PCB from the two latches ("Y" on the FAX1170/1270/1010/1020/MFC1770, "Z" on the FAX1570MC/1030/ MFC1870MC/1970MC) on the control panel. Unlock the LCD cable connector and disconnect the LCD flat cable. (7) To separate the FPC key from the control panel PCB, unlock the FPC key connector and disconnect the FPC key. Spring plate A Anti-static brush Separation rubber ADF parts Spring plate B Pressure roller, front Pressure roller, rear I I 9 Panel rear cover Main-panel harness Rubber foot FPC key ';$< 1 >- ~000 0 0 Control panel PCB (FAX1170/1270/1010/1020/MFC1770) FPC key connector Control panel PCB (FAX1570MC/1030/MFC1870MC/ 1970MC) LCD cable connector Microphone (Provided on the FAX1570MC/ 1030/MFC1870MC/1970MC) o 000 o 0 .o 0 Control panel (placed upside down) 2 'Y" latches IV - 21 8 "X" latches "Z" (Rear) LCD