Brother International FAX-1010 Service Manual - Page 145
Sensor, Operational, Check
View all Brother International FAX-1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
3.7 Sensor Operational Check ■ Function This function allows you to check that the seven sensors (document front sensor, document rear sensor, cover sensor, paper ejection sensor, paper-edge sensor, ribbon sensor, and hook switch sensor*) operate correctly. (* In the FAX1010 and those versions equipped with a Binatone handset, the hook switch sensor serves no function.) In the FAX1010 and those versions equipped with a Binatone handset, the LCD shows the "FRERCJMPHRX 1" when In this area a numeral appears, indicating the number of communications records printed out at the factory for testing. - the document front and rear sensors detect no paper (FRE), - the recording paper cover ASSY is closed (RC), - the paper ejection sensor detects no paper jam (JM), - the paper-edge sensor detects paper loaded and the paper front cover is closed (PH), and - the ribbon sensor detects the ribbon cartridge loaded (RX). In other models, the LCD shows the "FRERCJMPHRXHK 1" when - the document front and rear sensors detect no paper (FRE), - the recording paper cover ASSY is closed (RC), - the paper ejection sensor detects no paper jam (JM), In this area a numeral appears, indicating the number of communications records printed out at the factory for testing. - the paper-edge sensor detects paper loaded and the paper front cover is closed (PH), - the ribbon sensor detects the ribbon cartridge loaded (RX), and - the hook switch sensor detects the on-hook state (HK). ■ Operating Procedure (1) Press the 3 and 2 keys in this order in the initial maintenance mode. The equipment sounds 1100 Hz and 400 Hz tones cyclically through the following volumes for testing the speaker: 1100Hz Low -> Meduim -> High OFF OFF L 400 Hz High