Brother International FAX-1010 Service Manual - Page 116
Brother International FAX-1010 Manual
View all Brother International FAX-1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
WSW08 (Dial tone setting 2) Selector No. Function 1 I 1st dial tone detection time length 3 Setting and Specifications No. 1 2 3 000 : 001 : 0 1 : 0 1 10 : 10 0 : 101 : 110 : 111 : 50 ms 210 ms 500 ms 800 ms 900 ms 1.5 sec. 2.0 sec. 2.5 sec. No. 4 5 4 0 0 : 10 sec. Time-out length for 1st and 2nd 5 dial tone detection 0 1 : 20 sec. 1 0 : 6 sec. (in the U.S.A versions) 15 sec. (in other versions) 1 1 : 30 sec. 6 Detection level of 1st dial tone and busy tone before dialing 8 No. 6 7 8 000 : 001 : 010 : 011 : 10 0 : 101 : 110 : 111 : -21 dBm -24 dBm -27 dBm -30 dBm -33 dBm -36 dBm -39 dBm -42 dBm NOTE: The WSW08 is not applicable in those countries where no dial tone or line current detection is supported, e.g., U.S.A. • Selectors 1 through 3: 1st dial tone detection time length Upon detection of the 1st dial tone for the time length set by these selectors, the equipment starts dialing. This setting is effective only when selectors 1 through 3 of WSW05 are set to "1, 1, 1." • Selectors 4 and 5: Time-out length for 1st and 2nd dial tone detection These selectors set the time-out length for the 1st and 2nd dial tone detection so that the equipment waits dial tone input for the specified time length and disconnects itself from the line when no dial tone is inputted.