Brother International MFC-465CN Software & Network Users Manual - English - Page 161
The machine starts the scanning process
UPC - 012502618218
View all Brother International MFC-465CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Network Scanning (For models with built-in network support) Scan to File 12 When you choose Scan to File, you can scan a black and white or color document and send it directly to the Macintosh® you designate on your network. The file will be saved in the folder and file format that you have configured in ControlCenter2 on the designated Macintosh®. You can change the Scan configuration. (See File on page 141.) a Load your document. b Press the (Scan) key. c Press a or b to choose Scan to File. Press OK. d Press a or b to choose the destination Macintosh® you want to send to. Press OK. If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination Macintosh® on the control panel. Press OK. Note For DCP models, press a or b repeatedly to enter the first digit of the PIN number. Press c to move the cursor, then use a or b to enter the second digit. Repeat until you have entered all four digit of the PIN number. Press OK. e Press Black Start or Color Start. The machine starts the scanning process. Note • If you want to change between color and black and white scanning, choose color or black and white in the 12 scan type option on the Device Button tab of the ControlCenter2 configuration screen. (See SCAN on page 135.) • If you would like to change the file name of scanned documents, enter the file name in the File Name section on the Device Button tab of the ControlCenter2 configuration. • Scan type depends on the settings of the Device Button tab, Black Start or Color Start do not change the settings. 155