Brother International XR1300 Users Manual - English - Page 67
Turn on the sewing machine, and then select
View all Brother International XR1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Hold the quilting foot in place with your right c hand, and then tighten the presser foot holder screw using the disc-shaped screwdriver in your left hand. Use both hands to hold the fabric taut, then f move the fabric to follow the pattern. Reinforcement stitches are sewn at the beginning and end of sewing. a Presser foot holder screw CAUTION ● Be sure to securely tighten the screws with the disc-shaped screwdriver, otherwise the needle may touch the presser foot, causing it to bend or break. a Pattern After sewing is finished, slide the feed dog 3 g position lever to (to the left as seen from the front of the machine) and turn the handwheel to raise the dogs. Slide the feed dog position lever, located at the d rear of the machine on the base, to (to the right as seen from the front of the machine). • Normally, the feed dog position lever is positioned at . a Feed dog position lever (as seen from the rear of the machine) X The feed dogs are lowered. Turn on the sewing machine, and then select a e stitch. 65