Canon 3305211 User Manual - Page 102
Press the <, > button to pop-up, the built-in flash., Focus the subject., > button., Take
UPC - 689076851770
View all Canon 3305211 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Using the Built-in Flash A FE LockN FE (flash exposure) lock obtains and locks the correct flash exposure reading for any part of a subject. 1 Press the button to pop-up the built-in flash. Press the shutter button halfway and look in the viewfinder to check that the icon is lit. 2 Focus the subject. 3 Press the button. (8) Aim the viewfinder center over the subject where you want to lock the flash exposure, then press the button. X The flash will fire a preflash and the required flash output is calculated and retained in memory. X In the viewfinder, "FEL" is displayed for a moment and will light. Each time you press the button, a preflash is fired and the required flash output is calculated and retained in memory. 4 Take the picture. Compose the shot and press the shutter button completely. X The flash is fired to take the picture. If the subject is too far away and beyond the effective range of the flash, the icon will blink. Get closer to the subject and repeat steps 2 to 4. 102