Canon 3305211 User Manual - Page 29
Open the cover., Remove the CF card., Removing the Card
UPC - 689076851770
View all Canon 3305211 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Installing and Removing the CF Card Removing the Card 1 Open the cover. Set the power switch to . Make sure the access lamp is off, then open the cover. Access lamp 2 Remove the CF card. Press the CF card eject button. X The CF card will come out. Close the cover. When the access lamp is lit or blinking, it indicates that the images are being written to or read by the CF card, being erased, or data is being transferred. While the access lamp is lit or blinking, never do any of the following. Doing so may damage the image data. It may also damage the CF card or camera. • Shaking or banging the camera around. • Opening the CF card slot cover. • Removing the battery. If the CF card already contains recorded images, the file number might not start from 0001. (p.72) If "Err CF" (Error CF) is displayed on the LCD panel, see page 43. When holding a hard disk-type card, always hold its sides. You may damage the card by holding its flat surfaces. Compared to CF cards, hard disk-type CF cards are more vulnerable to vibration and physical shock. If you use a such a card, be careful not to subject the camera to vibration or physical shock especially while recording or displaying images. On the menu, if you set [1 Shoot w/o card] to [Off], it will prevent shooting without a CF card. 29