Canon 3305211 User Manual - Page 99
Using the Built-in Flash
UPC - 689076851770
View all Canon 3305211 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Using the Built-in Flash E-TTL II autoflash obtains high-precision and consistent flash shots. Using the Built-in Flash in the Basic Zone If necessary, the built-in flash will pop-up automatically in low-light or backlit conditions. (except in modes) Using the Built-in Flash in the Creative Zone Regardless of the light level, you can press the button to pop-up and fire the built-in flash whenever desired. If the built-in flash has popped up, you can push it back down with your fingers. d : For fully automatic flash photography. The shutter speed (1/ 60 sec. - 1/250 sec.) and aperture are set automatically. s : Enables you to set the desired shutter speed (30 sec. - 1/ 250 sec.). The flash exposure will be set automatically to match the aperture that was set automatically. f : Enables you to set the desired aperture. The flash exposure will be set automatically to match the aperture that was set. The shutter speed will set automatically between 30 sec. - 1/250 sec. to suit the scene's brightness. In low light, the main subject is exposed with the automatic flash, and the background is exposed with a slow shutter speed set automatically. Both the subject and background look properly exposed (automatic slow-speed flash sync). With slow shutter speeds, using a tripod is recommended. If you do not want to use a slow shutter speed, set [8C.Fn I -7] (Flash sync. speed in Av mode) to [1:1/250sec. (fixed)]. (p.155) a : You can set both the shutter speed (bulb or 30 sec. - 1/250 sec.) and aperture. The flash exposure will be set automatically to match the aperture that was set. The background exposure will vary depending on the shutter speed and aperture. 8 : The flash result will be the same as the mode. 99