Canon 3305211 User Manual - Page 97
Using the Eyepiece Cover
UPC - 689076851770
View all Canon 3305211 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Bulb Exposures Using the Eyepiece Cover If you take a picture without looking at the viewfinder, light entering the eyepiece can throw off the exposure. To prevent this, use the eyepiece cover attached to the camera strap. 1 Remove the eyecup. From the bottom of the eyecup, push it upward. 2 Attaching the Eyepiece Cover. Slide the eyepiece cover down into the eyepiece groove to attach it. Connecting the Remote Switch You can connect Remote Switch RS-80N3 or Timer Remote Controller TC-80N3 (both sold separately) or any EOS accessory equipped with an N3-type terminal to the camera and shoot with it. To operate the accessory, refer to its instruction manual. 1 Open the terminal cover. 2 Connect the plug to the remote control terminal. Connect the plug as shown in the illustration. To disconnect the plug, grasp the plug's silver part and pull out. 97